Profile library · Comparison
UPE and UPN channels: comparison table
Compare parallel-flange UPE channels with tapered-flange UPN channels.
Included families
Compare before opening a data page
The values below are recalculated from simplified nominal geometry. Open a designation to inspect its diagram, dimensions and all available properties.
UPEUPN
Comparison table
UPE and UPN
Select a designation to open its dedicated data page.
| Designation | Main dimensions | A | Mass | Ix | Iy | Wx | Wy |
|---|---|---|---|---|---|---|---|
| UPE 80 | h=80 mm · b=50 mm · tw=4 mm · tf=7 mm · r=8 mm | 9.64 cm² | 7.5674 kg/m | 103.13 cm⁴ | 24.76 cm⁴ | 25.782 cm³ | 7.9107 cm³ |
| UPE 100 | h=100 mm · b=55 mm · tw=4.5 mm · tf=7.5 mm · r=9 mm | 12.075 cm² | 9.4789 kg/m | 199.89 cm⁴ | 37.523 cm⁴ | 39.978 cm³ | 10.57 cm³ |
| UPE 120 | h=120 mm · b=60 mm · tw=5 mm · tf=8 mm · r=9 mm | 14.8 cm² | 11.618 kg/m | 348.44 cm⁴ | 54.416 cm⁴ | 58.073 cm³ | 13.72 cm³ |
| UPE 140 | h=140 mm · b=65 mm · tw=5.5 mm · tf=9 mm · r=10 mm | 18.41 cm² | 14.452 kg/m | 585.98 cm⁴ | 79.105 cm⁴ | 83.711 cm³ | 18.251 cm³ |
| UPE 160 | h=160 mm · b=70 mm · tw=5.5 mm · tf=9.5 mm · r=10 mm | 21.055 cm² | 16.528 kg/m | 882.6 cm⁴ | 105.45 cm⁴ | 110.33 cm³ | 22.495 cm³ |
| UPE 180 | h=180 mm · b=75 mm · tw=5.5 mm · tf=10.5 mm · r=11 mm | 24.495 cm² | 19.229 kg/m | 1,316.9 cm⁴ | 141.95 cm⁴ | 146.33 cm³ | 28.443 cm³ |
| UPE 200 | h=200 mm · b=80 mm · tw=6 mm · tf=11 mm · r=12 mm | 28.28 cm² | 22.2 kg/m | 1,855.5 cm⁴ | 185.18 cm⁴ | 185.55 cm³ | 34.31 cm³ |
| UPE 220 | h=220 mm · b=85 mm · tw=6.5 mm · tf=12 mm · r=12 mm | 33.14 cm² | 26.015 kg/m | 2,616.8 cm⁴ | 244.09 cm⁴ | 237.89 cm³ | 42.385 cm³ |
| UPN 80 | h=80 mm · b=45 mm · tw=6 mm · tf=8 mm · slope=0.08 mm | 12.257 cm² | 9.6216 kg/m | 118.47 cm⁴ | 22.934 cm⁴ | 29.618 cm³ | 7.9202 cm³ |
| UPN 100 | h=100 mm · b=50 mm · tw=6 mm · tf=8.5 mm · slope=0.08 mm | 15.029 cm² | 11.798 kg/m | 232.21 cm⁴ | 34.922 cm⁴ | 46.442 cm³ | 10.668 cm³ |
| UPN 120 | h=120 mm · b=55 mm · tw=7 mm · tf=9 mm · slope=0.08 mm | 18.883 cm² | 14.823 kg/m | 413.1 cm⁴ | 52.014 cm⁴ | 68.85 cm³ | 14.053 cm³ |
| UPN 140 | h=140 mm · b=60 mm · tw=7 mm · tf=10 mm · slope=0.08 mm | 22.647 cm² | 17.778 kg/m | 685.96 cm⁴ | 75.179 cm⁴ | 97.994 cm³ | 18.628 cm³ |
| UPN 160 | h=160 mm · b=65 mm · tw=7.5 mm · tf=10.5 mm · slope=0.08 mm | 26.72 cm² | 20.975 kg/m | 1,054 cm⁴ | 103.31 cm⁴ | 131.75 cm³ | 23.322 cm³ |
| UPN 180 | h=180 mm · b=70 mm · tw=8 mm · tf=11 mm · slope=0.08 mm | 31.115 cm² | 24.425 kg/m | 1,548.1 cm⁴ | 138.46 cm⁴ | 172.01 cm³ | 28.714 cm³ |
| UPN 200 | h=200 mm · b=75 mm · tw=8.5 mm · tf=11.5 mm · slope=0.08 mm | 35.833 cm² | 28.129 kg/m | 2,193.2 cm⁴ | 181.69 cm⁴ | 219.32 cm³ | 34.85 cm³ |
Continue the calculation
Reuse the selected properties
Area is used for linear mass, section modulus for bending, and radius of gyration for buckling.